1 min read

Make the 1776 Sinnet | Tutorial

In this photo tutorial, you will see how to knot the Sinnet pattern. The Sinnet knot was designed by Todd Mikkelsen and is for the advanced makers.

If you follow the photo tutorial and make this knot with Paracord Type II 425, the collar will be about 3.8 cm wide and 1.2 cm thick. In the MatchMaker you can see how many meters of paracord you need and you can choose the colours for your project.

Start paracord knot

In this tutorial, the Kosmetik 2.0 technique is used as the setup. Need help making this? Then check out the tutorial on the Kosmetik setup here.

paracord knotparacord type III tutorial

paracord tutorialsinnet paracord knotparacord.eu tutorialsinnet knot start

Colour 1: Marvelous Mauve, colour 2: Cafè Latte, colour 3: Pearl Lilac, colour 4: Marvelous Mauve, colour 5: Foggy Green and colour 6: Dewdrop Green

After making the setup and adding the colours, it is helpful to check that the length of the setup is still correct. Make sure the left and right strands of each colour ware the same length.

Knotting the Sinnet

paracord type II tutorial

paracord type II pastel colourspastel colours cord

paracord sinnet tutorialparacord sinnet tutorial step 10

paracord.eu tutorial step 11sinnet knot silver buckle

paracord.eu silver buckle6 colours cord tutorial

Marvelous Mauve type II tutorialCafè Latte Paracord Type II tutorial

Foggy Green Paracord Type IIDewdrop Green Paracord Type II

Pearl Lilac Paracord Type IIparacord blog tutorial

paracord blog sinnet knotparacord.eu blog sinnet

Tighten the knot. Repeat from step 10 and continue until your work is the desired length.

result sinnet knotresult sinnet knot tutorial

This knot was designed by Todd Mikkelsen. We would like to thank him for his permission to use this knot.

Share this post

More posts about Paracord

More posts about Tutorial

Back to overview